Foothill CollegeApproved Course Outlines

Biological and Health Sciences Division
3 hours laboratory.1 Unit

Total Quarter Learning Hours: 36 (Total of All Lecture, Lecture/Lab, and Lab hours X 12)
 Lecture Hours: Lab Hours: 3 Lecture/Lab:
 Note: If Lab hours are specified, see item 10. Lab Content below.

Repeatability -
Statement: Not Repeatable.

Status -
 Course Status: ActiveGrading: Letter Grade Only
 Degree Status: ApplicableCredit Status: Credit
 Degree or Certificate Requirement: AS Degree
 GE Status: Non-GE

Articulation Office Information -
 Transferability: CSUValidation: 12/08;5/09;12/09;1/26/11

1. Description -
Third of three courses that includes laboratory participation and application of basic positioning, patient care, equipment manipulation, radiation protection, image analysis and technical radiographic experiments. Emphasis on vertebral column, sacrum and coccyx, ribs and skull as learned in the companion lecture course, R T 51C. Intended for students in the radiologic technology program.
Prerequisite: R T 53BL.
Co-requisite: None
Advisory: None

2. Course Objectives -
The student will be able to:
  1. Demonstrate accuracy in radiation protection for the patient, personnel, and self.
  2. Exhibit knowledge, understanding, and dexterity in the proper use of radiographic equipment.
  3. Adhere to the Program's standards of attendance, punctuality, and dependability.
  4. Conduct themselves in a professional manner with classmates and staff.
  5. Apply theory to practice by exhibiting ongoing, satisfactory job performance skills.
  6. Select proper technical factors for radiographic procedures on an average patient.
  7. Exhibit proper positioning skills for vertebral column, sacrum and coccyx, ribs and skull.
  8. Demonstrate knowledge and understanding of various nursing procedures and basic patient care.
  9. Performance of radiographic technical lab experiments.
3. Special Facilities and/or Equipment -
Energized x-ray units with all accessory equipment, image recepters, viewboxes, and darkroom.

4. Course Content (Body of knowledge) -
  1. Radiation Protection (Lab)
    1. Closing doors during procedures and exposures.
    2. Shielding all patients.
    3. Collimating to image receptor size and/or part size.
    4. Protecting self and others from irradiation by wearing aprons, gloves, and dosimeter.
    5. Patient pregnancy status.
  2. Equipment (Lab)
    1. Competency and proficiency with equipment.
    2. Safety precautions
    3. Effective manipulation of control panel.
  3. Punctuality and dependability (Lab)
    1. Punctuality in reporting to the lab on time.
    2. Minimum loss of time due to absenteeism.
    3. Communicating whereabouts appropriately.
  4. Professional conduct (Lab)
    1. Being tactful and courteous with staff and others.
    2. Taking the initiative and helping other staff members.
    3. Working as a team with classmates.
    4. Accepting constructive criticism.
    5. Conducting oneself in a professional manner.
    6. Communicating effectively and following instructions.
    7. Contributing to a pleasant work environment.
  5. Job Performance (Lab)
    1. Marking all radiographs according to laboratory protocol.
    2. Planning and organizing work efficiently.
    3. Being alert and interested in what is happening in the room and asking pertinent questions.
    4. Reading and understanding the requisition and properly identifying the patient.
    5. Maintaining a neat, clean, and well-stocked room.
    6. Communicating effectively.
    7. Following verbal instructions with multiple steps.
    8. Making effective use of free time.
    9. Completing the exam in a reasonable amount of time.
    10. Demonstrating proper ethical behavior.
  6. Technical Factors (Lab)
    1. Setting the control panel accurately for an exposure.
    2. Understanding how various mA, kV, time, and distance factors effect the radiographic image.
    3. Being able to differentiate between phototiming and manual technique.
    4. Checking control panel before exposure.
  7. Positioning (Lab)
    1. Knowing department routines for exams stated in laboratory objectives.
    2. Knowing specific centering for each part radiographed including angulation of the x-ray tube and body part.
    3. Positioning the patient carefully and accurately; using proper immobilization.
    4. Identifying basic anatomy and critiquing images.
    5. Handling patients gently when positioning, using concise instructions, and watching patient during breathing instructions.
    6. Performs accurate positioning for vertebral column, sacrum and coccyx, ribs and skull.
  8. Patient Care and Nursing Procedures (Lab)
    1. Communicating effectively with the patient.
    2. Explaining exam to the patient.
    3. Using a safe approach when transferring patients.
    4. Completing the exam in a reasonable amount of time.
  9. Radiographic technical lab experiments. (Lab)
5. Repeatability - Moved to header area.
6. Methods of Evaluation -
Laboratory performance evaluation.
7. Representative Text(s) -
Foothill College (R T) Laboratory Manual.

8. Disciplines -
Radiological Technology
9. Method of Instruction -
Discussion, Demonstration, Practice sessions.
10. Lab Content -
  1. Laboratory practice
    1. Radiation protection.
    2. equipment operation.
    3. Image production and evaluation.
    4. Anatomy Identification.
    5. Radiographic positioning procedures for vertebral column, sacrum and coccyx, ribs and skull.
    6. Patient care techniques.
11. Honors Description - No longer used. Integrated into main description section.
12. Types and/or Examples of Required Reading, Writing and Outside of Class Assignments -
Weekly reading assignments from the laboratory manual.
13. Need/Justification -
This course is required core course for the A.S. degree in Radiologic Technology.

Course status: Active
Last updated: 2014-03-20 16:54:28

Foothill CollegeApproved Course Outlines